Since it works, I am happy.Building a CustoMac Hackintosh: Buyer's GuideMac Pro 20082012 comes with slow and old graphics cards. Has boot screen, and was appropriately recognized by my mac pro. Installed it into my 2010 5,1 mac pro running High Sierra, and it works like a charm. Was a bit concerned when card arrived in fairly poor packaging, no box or paperwork, had scuffs on card, and not the mac edition card pictured.Upgraded from High Sierra 10.13.6 to 10.14.4 to 10.14.5 using DosDude's Mojave Patcher. Dual screen/DVI and graphics acceleration works perfectly. This updated debug info does not reflect changes after Post #41 of this thread.EDIT: Now running MacOS Mojave 10.14.5 with Nvidia GeForce 9800GT.Model: MacPro 5,1 (LPC.IOName = "3b09") CPU: Xeon X3460 (overclocked with Speedstep enabled, CPU frequency setting increased from 133 to 160, peak CPU frequency is 4.16 GHz - exceeds performance of normally-clocked X3480) Motherboard: Biostar TH55HD Socket 1156 MacOS: Mojave 10.14.6 with Supplemental Updates 1 & 2 (APFS) I started with an I5-660 CPU, then Xeon X3450 / NVidia 8600GT, then a Xeon X3480 / NVidia 9800GT, then an overclocked X3450 / NVidia 9800 GT and now an overclocked X3460 / NVidia 9800 GT.
Compatible Video Cards Pro 3,1 Nvidia 9800Gt Pro Running HighStarted with VoodooHDA, but audio quality seems much better with AppleALC. Sound is working after applying an ALC888 DSDT patch (layout-id = 1) and installing Lilu/AppleALC). NO CLOVER CPU options needed (including no need for Generate C & P States). Using IOName "3b09" in LPCB._DSM. MacPro5,1 is Intel Westmere family which includes and/or is closely related to Clarkedale (the i5-660) and Lynnfield (Xeon X3450). Speedstep (CPU frequency switching) is working perfectly and CPU temps are low after selecting SMBIOS Model MacPro5,1 (speedstep did not work with iMac14,2). Without DosDude's patch, video "worked" (without graphics acceleration) at 1280x10x1200 with the built-in I5-660 HD Graphics (no kexts, no Clover options) and NVidia 9800GT. In Mojave, 9800GT video is working perfectly after applying DosDude's legacy video patch. NVidia 9800GT Video works fine in High Sierra. Ethernet is working with RealtekRTL8111.kext USB port / sleep behavior is no different with USBInjectAll.kext and SSDT-UIAC.aml. NOTE: I added USBInjectAll.kext and a customized SSDT-UIAC.aml to see if this would fix sleep issues. See Installation Notes below. Without standby voltage enabled via jumpers, system would wake immediately after sleeping when "USB Wake from S3/S4" was enabled in BIOS and a USB device was plugged into a USB port. This comment is for Suspend State 3: System appears to sleep properly when S3 Suspend State is enabled in BIOS (no Instant Wake problem and power LED is flashing slowly when asleep) after setting Motherboard USB jumpers (2 jumpers: 1 for front panel and 1 for rear panel) to enable +5VDC on standby. EDIT: I am currently running with Suspend State S1 enabled in BIOS. Wake from Sleep (S3 Suspend State) in Mojave and High Sierra (same behavior in both): System cold boots (including full BIOS Power-on Self Test) instead of resuming when I wake from sleep by clicking the USB mouse button. Overclocked X3450 and overclocked X3460 performance exceeds normally-clocked X3480. Mojave performance is better with a Xeon X3480, even better with an overclocked Xeon X3450 and even better with an overclocked Xeon X3460 (X34x0 doesn't have AES-NI instructions). I'm not a gamer - just lots of software builds. I'm old-school and prefer to manually perform as many DSDT edits as possible (instead of automatic CLOVER patches). I performed a clean install of Mojave 10.14.4 on my Thinkpad T61 (Penryn T9300 CPU, NVidia NVS 140m) with DosDude's Mojave patcher, so you should also be able to use DosDude's Mojave patcher to perform a clean installation of Mojave on MacPro 5,1/Legacy NVidia. After installation, change your model to MacPro 5,1. If you try to install on MacPro 5,1 Mojave will say you don't have metal. Mojave installer will continue without metal support. If you're performing a clean installation of Mojave on your old socket 1156 motherboard with Gen 1 HD Graphics or old NVidia graphics, set your model to iMac 14,2 for the installation. I no longer have this USB issue with Legacy USB disabled. Leaving this issue described here for background. EDIT: This USB issue is resolved by disabling Legacy USB support in BIOS. The TH55HD bios uses naming convention that differs from Gigabyte, so I have attempted to rename devices to the best of my ability. If I lose my front-panel USB ports after a BIOS config change, I can always recover by selecting NVRAM reset in BIOS and booting with a USB device inserted into one of the front-panel USB ports. Note that My EHC2 (rear-panel) USB ports don't have this problem. Again, I only needed the DSDT edits mentioned in the second Installation Notes bullet above and do not need any USB kexts or config options in CLOVER config.plist for working USB. After booting once with an inserted USB device, EHC1 USB ports are active when I boot (with or without an inserted USB device). Without this, my front-panel (EHC1) USB ports were not active after booting. After getting everything working (except wake as noted) with High Sierra 10.13.6, I used DosDude's Mojave patcher to create a Mojave install USB. Without this, system wakes immediately from sleep if a USB device is plugged into a USB port and "USB Wake from S3/S4" is enabled in BIOS. Set Motherboard USB jumpers to enable +5VDC on standby. Diablo 2 item downloadMojave works perfectly with Nvidia GeForce 9800GT, dual-DVI displays, graphics acceleration.
0 Comments
Leave a Reply. |
AuthorAnthony ArchivesCategories |